Shop
Showing 106–121 of 121 results
-
Sod Cutter 12 Inch
$79.00 – $99.00Potential uses include clearing room for a sidewalk or driveway, landscaping beds, or anything else that requires sod removal.
-
Stump Cutter – Barreto 30-SG Track
$239.00 – $299.00Easy to operate, powerful, and portable. Our Barreto track stump cutter will power through any stumps that need removal.
-
Submersible Pump 2
$55.00 – $75.00- These high performance single-phase submersible pumps.
- Silicon carbide-faced double mechanical seals run in an isolated oil-filled cavity.
- Lightweight, compact design with heavy-duty strain relief power cord.
- PST models feature shaft-mounted agitators which suspend solids when pumping sand and debris.
- Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs
-
Survey Equipment w/Tripod & Measuring Stick
$59.00 – $79.00 -
Sweeper, BB250 Broce Broom
$226.00 – $282.00Our Broce Broom 250 is a highly agile sweeper for cleanup and paving projects. Commonly used to keep everything from bike trails, hiking trails, neighborhood streets, and even golf cart paths clean.
-
Table Saw
$49.00 – $69.00The Ryobi 10 in. 15 Amp Table Saw includes a durable steel stand and is lightweight and easy to use, making it a great addition to any tool collection. Powered by a 15 Amp motor, it can generate up to 5000 RPM for powerful cutting and the 25 in. x 17 in. table provides support for large ripping operations. The saw also features an adjustable miter gauge for accurate cross cutting.
- Heavy-duty steel stand provides solid support
- Tough, 15 Amp motor delivers 5000 RPM for powerful performance
- Rip fence easily guides material during rip cuts
- Lightweight design for easy transport
- Large on/off switch for accessibility and visibility
- Adjustable miter gauge for accurate cross cuts
- Rack and pinion blade height adjustment provides accurate depth control
- 24-tooth carbide-tipped blade for a variety of cuts
- Table-mounted push stick storage
- 3-year limited warranty
-
Transmission Jack 1200 Lbs.
$59.00 – $79.00-
FEATURES / BENEFITS
- Universal saddle with four ratcheting arms quickly adjust to any transmission pan configuration
- Wide chassis for load distribution and stability
- Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and ram over extension
- Pump handle rotates 36 degrees for operation from any direction
- Slow controlled lowering of load by a conveniently located release valve knob.
- Four ball bearing mounted swivel caster wheels for easy maneuvering
-
-
Trash Pump
$99.00- 6.5 O.H.V. GX200 Honda Engine
- Pumps 17,000 gph
- True 3″ Suction/Discharge Flanges
- Suction Lift between 25-30 ft. Total Head lift 85-90 ft.
- Cast Iron Impeller and Turbine Cover
- Low Oil Shutdown
- Comes with 100 feet of hose (50-50)
-
Two Man Auger
$79.00 – $99.00The Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance.
-
Vermeer BC700 XL Wood Chipper
$239.00 – $299.00- Tow behind with 2 inch ball
- Cuts up to a 6 inches in diameter
- Great for homeowners and smaller projects
- Can use for mulch
-
GENERAL DIMENSIONS AND WEIGHTS
- Length – Feed Table Up, Tongue In113 in
- Length – Table Down, Tongue Extended133 in
- Width71 in
- Height102 in
- Weight –1800 lbs
- Tongue Weight – 180 lbs
-
DRUM/DISC CUTTING SYSTEM
- Material Capacity6 in
- Width8 in
- Thickness1.3 in
- Diameter23.9 in
- Speed1748
- Weight With Shaft176 lbs
- Knife Thickness.6 in
- MaterialA8 Chipper Steel
- Replaceable Threaded Knife Block Yes
- Fixture Method Welded
- Air Flow 5000 cfm
-
GENERAL DIMENSIONS AND WEIGHTS
- Length – Feed Table Up, Tongue In113 in
- Length – Table Down, Tongue Extended133 in
- Width71 in
- Height102 in
- Weight –1800 lbs
- Tongue Weight – 180 lbs
-
DRUM/DISC CUTTING SYSTEM
- Material Capacity6 in
- Width8 in
- Thickness1.3 in
- Diameter23.9 in
- Speed1748
- Weight With Shaft176 lbs
- Knife Thickness.6 in
- MaterialA8 Chipper Steel
- Replaceable Threaded Knife Block Yes
- Fixture Method Welded
- Air Flow 5000 cfm
-
DISCHARGE SYSTEM
- Chute Height97.2 in
- Bottom Thickness.1 in
- Top Thickness.1 in
- Side Wall Thickness.1 in
- Deflector Thickness.1 in
- Chute Rotation Angle 240 deg
- Rotation Type Manual
- Rotational Lock Standard Latch
-
HYDRAULIC SYSTEM
- Tank capacity6.8 gal
- Recommended Oil TypeVermeer VMF Gold
- System Type Open center
- Filtration Method Return flow filtration, 10 micron
- Pump Flow at Maximum RPM3.8 gpm
- System relief pressure2500 psi
-
Vibratory Plate Compactor
$89.00 – $109.00Multiquip MVC88VGH 19.7″ x 20.7″ Mikasa Plate Compactor
Easy to use, easy to transport, the MVC88 is one of the newest and most technically advanced compactors on the market. The anti-vibration handle design reduces vibration up to 50% compared to other plate compactors.
- Protective engine guard
- Multiquip forward plate compactors have always used vibrator (eccentric) housings that are bolted onto the forward end of the plate. This allows service access without having to strip down the entire plate and greatly reduces down time.
- Sealed belt cover keeps dirt and rocks out of the belt
- Convenient oil drain for engine oil
- Cog-tooth belt drive for longer life
- Self-cleaning plate design minimizes dirt and rock build-up
- Four lifting handles so plate can be lifted from the side
- Optional 2.875 gallon water tank
- Engine oil shutdown
-
Wacker 3′ Double Drum Roller
$229.00 – $289.00Operating weight w/ballast (metric tons):
1.57
Operating weight w/ballast (lbs):
3,483
Performance
Nominal amplitude range (in):
0.02″
Vibration frequency range (hz):
52 – 65
Centrifugal force range (lbs):
3,597 – 5,620
Dimensions
Length (ft/in):
7′ 5″
Width (ft/in):
2′ 9″
Height w/ROPS (ft/in):
7′ 3″
Drums
Drum width (in):
31.5″
Drum diameter (in):
24.4″
Engine & Drive
Engine make:
Kubota
Engine model:
D1005
Gross power (hp):
14.8
-
Weed Edger
$59.00 – $79.00The TB554 gas lawn edger is perfect for cutting a clean edge along driveways and walks, beautifying lawns and flower beds.
-
Welder
$75.00 – $95.00The Lincoln Electric Handy MIG Welder is a user-friendly, compact portable and lightweight wire-feed welder that plugs into a 115-volt, 20 Amp outlet.