Shop

Material Lift MLC 18.6′
$109.00 – $139.00

Maximum load capacity 14 in (36 cm) load center: 700 lbs, 318 kg
Maximum load capacity 24 in (61 cm) load center: 440 lbs, 200 kg
Maximum load capacity 42 in (107 cm) load center: 185 lbs, 84 kg
Material Lift MLC 24
$129.00 – $159.00

Load Capacity:

14 in load center: 650 lbs
24 in load center: 430 lbs
42 in load center: 175 lbs
MEC Model 1930SWE Scissor Lift
$200.00
- Indoor working height: 25ft
- Outdoor working height: 25ft
- Platform Height Indoor: 19ft
- Platform Height Outdoor: 19ft
- Maximum Drive Height: 19ft
- Stowed Height Top Guardrail: 79.75in
- Stowed Height Platform Floor: 40.75in
- Guardrail Height: 39in
- Machine Weight Unloaded: 3,440LB
- Length-Stowed (Overall): 74in
- Width (Overall): 30in
- Wheel Base: 54in
- Tire Size: 12 x 4in

Mini Excavator 17Z-9

$229.00 – $289.00

As soon as you step in the 17Z-9, you’re in a different world. The right technologies have been carefully selected to offer you better comfort and safety.

Technical Details

Alternator	12 V – 40 A
Bore x Stroke	72 x 73.6 mm
Engine Type	4 cycle, In line, Water cooled, Diesel, Tier 4 certified
Engine model	Kubota D902
Max. torque	5.46 kgf m
Piston displacement	898 cc
Starting Motor	12 V – 1.2 kW
Engine Emission	EPA Tier 4
Engine Power	12 kW
Arm	60 x 353 mm
Boom	60 x 440 mm
Bucket	55 x 320 mm
Driving Motor	Two speed axial piston motor with counter balance valve
Swing Motor	Axial piston motor
Max. Flow	2 x 18.8 + 11.3 l/min
Sub-pump for pilot circuit	Gear pump
Type	Variable displacement piston pumps
Swing circuits	210 kgf/cm²
Pilot circuits	35 kgf/cm²
Service valve	Installed
Swing circuits	170 kgf/cm²
Travel	210 kgf/cm²
Operation Weight	1700 kg
Bucket Capacity	0.04 m³ – 0.04 m³

Mini Excavator Case CX17C
$229.00 – $289.00
- Perfect for yards with gate width restrictions or subdivisions
- Tracks can adjust to 39 inches
- 12 or 18 inch buckets available
- Operating weigh 3,910 Lbs.
- 16.8 hp engine power
- Dig Depth is 7 ft. 6 in.
Mini Grinder 4
$19.00 – $39.00

The Makita 4 in. Angle Grinder has a 6 Amp motor that maintains performance during extended use and grinds at speeds up to 11,000 RPM for the most demanding applications.
Mini Trencher 18
$79.00 – $99.00

– Easy to use, operator-friendly controls

– Low Maintenance
– Fits through narrow gates and doorways
– Will trench close to walls, fences, etc.
– Heavy gauge steel unibody frame
– Durable powder coated finish
– Choice of carbide tipped Shark Teeth or carbide tipped Bullet Teeth
– Solid roller digging chain for increased life
– Wide pneumatic tires with tubes
– Centrifugal clutch equipped with needle bearings and all metal drum and shoes
Mini-Excavator Cat 303
$299.00 – $359.00
Mini-Excavator Cat 303.5
$339.00 – $399.00
Miter Saw 10
$39.00 – $59.00
The Ryobi 14-Amp 10 in. Compound Miter Saw is built around a heavy-duty motor that delivers up to 5,000 RPM, making it great for a host of tough cutting applications. Its carbide-tipped blade changes with a single wrench, and a dual-view bevel scale helps provide a clear line of sight from either side. It miters to 45° left and right with stops at 0°, 15°, 22.5°, 30° and 45° and it is equipped with an electric brake that halts the blade in seconds for added safety. A horizontal D-handle improves comfort and control.
- Heavy duty 14-Amp motor for a variety of cuts
- Adjustable exact line laser alignment system accurately aligns cut line with blade
- Carbide-tipped blade for cleaner cuts
- 9 ball detent stops at the most common miter cutting angles
- Electric brake stops the blade in seconds
MK Brick Saw
$59.00 – $79.00
- Great for cutting brick and pavers

Mud Mixing Drill

$25.00 – $45.00

Powerful 8.5 AMP Motor with Variable Speed for Improved Mixing and Drilling Performance

600 RPM provides increased speed and torque for drilling large holes
Heavy duty industrial 1/2″ drill chuck engineered for positive bit retention
All-ball bearing construction for durability and longer tool life
Rocker switch for quick transition between forward and reverse operation
On-board chuck key storage for fast and convenient bit changes
D-handle rotates 360° with 24 positive stops for multi-position operation
Well-balanced design at only 6.3 lbs. for reduced operator fatigue
Rubberized grip for increased operator comfort
Powerful 8.5 AMP motor with variable speed for improved mixing and drilling performance
Double insulated

One Man Auger Tow Behind
$129.00 – $149.00

One Man Auger. The first one-man hole digger to feature an all-position 4 stroke gasoline engine.
Paint Sprayer
$99.00 – $129.00
- Great for indoor and outdoor paint jobs
- $25.00 Cleaning fee added to every rental
Pallet Jack (2 ton)
$29.00 – $49.00
Piano Dolly
$39.00 – $59.00
Pressure Washer 3200 PSI
$79.00 – $99.00
- Great to use for dirty tough messes around the house like cleaning dirt and grime off driveways etc.
- Water Flow 2.5 GPM
- Weight: 85 Lbs
- Length: 33 inches
- Width: 21 inches
- Height: 19 inches
- Gas Powered
- Honda Engine
R20 Turf Rake (Dethatcher)
$89.00 – $109.00

Our turf rake is versatile and portable. Features foldable handles for easy storage in trucks and most SUVs. Compact and very easy to use.
Rear Tine Tiller
$79.00 – $99.00

Easy starting Honda commercial OHV engine
Rhino Pneumatic Post Pounder
$109.00 – $129.00

The PD-55 weighs just 54lbs and with a 3-1/2\\” piston, the PD-55 is capable of handling your toughest applications quickly and efficiently. Ideal uses include fence posts up to 3-5/8\\”, ground rods, delineator posts, form pins, and driving t-posts.
Scanmaskin 18 Concrete Grinder
$299.00

Designed to grind on different types of wood and concrete surfaces. It makes easy work out of grinding parquet and plank floors. Featuring an adjustable speed, which allows the use for both sanding wooden floors and polishing concrete.