Rental Equipment

The Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance.

Get the perfectly manicured look that makes you proud, all around your property — from edge to edge.  With variable edging depths and bevel capabilities, the TB554 gas lawn edger is perfect for cutting a clean edge along driveways and walks, beautifying lawns and flower beds.

• Self-sharpening, 9-in triple-edged blade cuts a clean edge along driveways, sidewalks and landscape beds
• 6-position edging depth up to 2 1/4″
• 3-position adjustable bevel for a customized look to your landscape beds
• Curb-hop wheel adjusts to make it easy to trim alongside raised areas
• Premium 7″ front and 8″ rear steel ball-bearing wheels handle well on a variety of terrains
• 140cc* Briggs & Stratton 500 Series engine

Cut the Tall Stuff with the Craftsman High Wheel 22″ Trimmer Small trimmers are great for most yards, but if you’re dealing with tall brush and weeds, you need the High Wheel 6.75 Torque Rating 22 in. Trimmer to get the job done right. This is the bad boy you want to rev up when you have to tackle areas that are thick with vines and weeds or spots overgrown with tall brush that need a high-wheel trimmer in order to reach your target. Balanced 12 in. wheels make it possible to roll this trimmer over tough terrain, tree roots and twisted, woody vines, especially with the help of its 6.75 torque rated engine. A free-floating guide ball helps to protect your machine from damage no matter how challenging the job.

• The High Wheel 6.75 Torque Rating 22″ Trimmer can handle dense vegetation and tall brush
• The 4-cycle engine has a 6.75 torque rating for extra power even when cutting woody vines and brush
• You can adjust the replacement line and height cut without the need for extra tools
• Its pull-rope start is strong and dependable
• The floating guide ball helps protect your trimmer from damage

MODEL # 525LS

MODEL # 525LS

Log Splitter 28TON H/V GX240 Honda

• 28 Ton splitting force
• Honda GX240 commercial engine
• 16 GPM pump
• 4.5″ cylinder
• Vertical/horizontal operation
• Improved heavier beam
• Heavy duty tongue with handle
• Drop down jack
• Safety chains
• 4.8 x 12 Highway tires
• 4 Lug wheels
• Upgraded wedge and hoses
• Steel fenders
• Hour meter

The Sc550 was designed for contractors and homeowners. Potential uses include clearing room for a sidewalk or driveway, landscaping beds, or anything else that requires sod removal.

The Brinly 18 in. x 24 in. Poly Lawn Roller features a large dia. for easy pushing or hookup behind a tractor for towing. It’s heavy duty drums resist denting and rusting. Holds 270 lb. when filled with sand or water.

• Assembled dimension: 39 in. W x 20 in. D x 19 in. H
• Heavy duty steel construction resists denting and rusting
• Rounded end caps prevent damage to lawns
• Large diameter fill opening for fast filling and emptying
• Handle is easy to remove
• Large dia. provides easy pushing and connection to a tractor

• 391 CFM and 165 MPH performance; Genuine OEM Echo Part
• Exclusive curved blower tube provides rotational control to reduce user fatigue
• Grouped controls including throttle with cruise
• Low noise, 65 dB(A)* output for noise sensitive environments

The first one-man hole digger to feature an all-position 4 stroke gasoline engine. Operate on the side of a hill, or store on its side without fear of damage or oil leaking from the crankcase. No mixing oil with gasoline or the need for two gasoline cans. The Comfort-Zone® operator handle helps maximize leverage and control, which reduces fatigue while increasing productivity and job site safety.

Type: Replaced with Honda GX35
Starter: Hand rewind
Fuel: Gasoline, unleaded automotive grade

Diameter: 2″ (51mm) to 8″ (203mm)
Extention: Non-flighted plain tube, depth to 45″ (1143mm)

• • Honda® GX120 Engine
• • Five tine wheels pull 15 percent more cores per square foot than competitive models for the best quality of core
• • Steerable tine shaft eases maneuverability and end of row turning
• • Self-propelled with an operating speed of 4.2 mph
• • Compact and portable; fits into tight spaces and through narrow gates
• • Dual front wheels provide exceptional balance on hills and slopes
• • Fold-down handle for compact transport and storage
• • Tie-down/lift handles ease transport
• • Ergonomic foam grip handle for user comfort
• • Unique tine engagement handle is easy to lift and lower
• • Easy to remove ergonomically shaped weights

• Easy starting Honda commercial OHV engine
• 26″ tilling width
• 14″ tine diameter
• Easy-to-use adjustable depth bar
• Standard transport wheel
• 3 position adjustable handle

• Easy starting Honda commercial OHV engine
• 26″ tilling width
• 14″ tine diameter
• Easy-to-use adjustable depth bar
• Standard transport wheel
• 3 position adjustable handle

MODEL # 525LK W/ BR600 ATTACHMENT

GREAT FOR TURF!!!

Load Capacity:

14in load center – 650lbs

24in load center – 430lbs

42in load center – 175lbs

Weight: 358lbs

Lift Heights –

Forks up -24\’ 4\”

Forks down -22\’ 7\”

Load Capacity:

14 in load center – 700lbs

24in load center – 440lbs

42in load center – 185lbs

Weight 310lbs

Lift Heights-

Forks up-18\\\\’6\\\\”

Forks down-16\\\\”10\\\\’

Our Broce Broom 250 is a highly agile sweeper for cleanup and paving projects. Commonly used to keep everything from bike trails, hiking trails, neighborhood streets, and even golf cart paths clean.

The DC 2900 is suitable for use with vacuum cleaning and source extraction from handheld power tools (up to 5\\\\” suction casings) and small table saws. The DC 2900 is sturdy but still lightweight and portable. It utilizes a steel collection container which makes for ideal use when collecting sharp items such as metal chips.

Both HEPA and OSHA certified.

Most powerful single phase dust extractor. Great for small table saws and vacuum cleaning. Prepared for fine dusts and materials created on construction sites from grinding, drilling, sanding, and many other hazards caused from industrial factory processes.

Both HEPA and OSHA certified.

Package rental: Dust Control Tromb 400 and Scanmaskin 18 concrete grinder

24 HR-$350

The Vermeer BC600 Wood Chipper is the right choice for many jobs. Its known for its transportability and ease of use. Attached to a truck or trailer, the Vermeer BC600 Wood Chipper is a compact yet powerful and feature-rich wood chipper.

• Horsepower 27
• Length 110″
• Width 53.5″
• Height 54″

User-friendly and great for cleaning decks, patios, driveways, outdoor furniture and home siding. The overhead valve engine starts easily and is equipped with low oil shutdown for protection.

The OEM Technologies ™ axial cam pump allows for optimal efficiency. The hose is kink & abrasion resistant providing durability. The ergonomic spray gun with safety lock-out provides multiple levels of comfort. Other accessories include a quick connect spray wand with three stainless steel quick connect nozzles; 15°, 25° and soap applicator nozzles allow you to select the spray pattern best suited for the job. Extra dirty? Just drop the detergent siphoning tube into pressure washer safe detergent and attach the soap applicator.

• Metal gear housing for jobsite durability and increased reliability
• Depth-sensitive, “set and forget” nosepiece for consistent fastener depth
• Rubber grip and two-finger trigger for increased comfort and greater control
• Helical-cut steel, heat-treated steel gears for long life and durability
• Lightweight with excellent ergonomics

• Prevent strain & injury by letting the lift do all the hard work
• Maximum reach for horizontal ceilings is 15 ft
• Breaks down small enough to fit into the trunk of a car

Easy to use 1900PSI portable pressure washing system

Comes with a hose, gun, and different nozzles upon request

• Large drum holds up to a 100-Foot by 3/4-Inch cable
• 1/2 HP motor with capacitor start
• Pneumatic foot switch
• Cables: Left-wound Flexicore wire rope center 3/4-Inch diameter for 4-Inch to 10-Inch lines and 3-Inch lines without sharp bends; 5/8-Inch diameter for 3-Inch to 6-Inch lines; 1/2-Inch diameter for 2-Inch to 3-Inch lines
• Cutter Set: 33-Inch Flexible Leader, Spear Head, 2-Inch U-Cutter, 3-Inch Side Cutter Blades, 4-Inch Side Cutter Blades, 3-Inch Heavy Duty Saw Blade, 4-Inch Rotary Saw Blades, and Large Retrieving Tool

• These high performance single-phase submersible pumps.
• Silicon carbide-faced double mechanical seals run in an isolated oil-filled cavity.
• Lightweight, compact design with heavy-duty strain relief power cord.
• PST models feature shaft-mounted agitators which suspend solids when pumping sand and debris.
• Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs

Holds 100 feet of 5/8\” cable that will clear obstructions in 3\” to 10\” drain lines.

Foldable handle to allow an easy fit in most SUV\’s

Powered by a 1/3 HP capacitor motor with thermal overload protection

Carrys 50 feet of 1/2\” cable in a lightweight and portable package.

1/3 hp motor with reverse switch and pneumatic foot pedal

Drives cable at up to 16ft/min

Holds 25 feet of 3/8 of Flexicore cable

66″ WIDE BRUSHHOG ATTACHMENT FOR SKIDSTEER

SOLID BOTTOM 72″ GREAT FOR BRUSH CLEAN UP!

Great for breaking concrete and rock!

6\” 8\” 12\” 18\” and 24\” inch auger available

RAKE BOTTOM 66″ GREAT FOR BRUSH CLEAN UP!

EXCELLET TIME SAVING ATTACHMENT!!

66″ WIDE BRUSHHOG ATTACHMENT USED ON WORKMASTER 35

This trailer features a hydraulic lift assist making unloading loads easy and quick!

14,000lb lift capacity

If you need a slightly bigger machine that values power, compact size and fuel efficieny equally, look no further than the 35Z-9. Adjust the cabin to your preferred comfort level and you’re ready for anything!

As soon as you step in the 17Z-9, you’re in a different world. The right technologies have been carefully selected to offer you better comfort and safety.

Technical Details

The 27Z mini-excavator is the perfect machine for your job. This light but powerful excavator is helpful for any backyard project.

Operation weight: 8046 lbs

Engine model: 3TNV88

Engine power: 20 kW / 27.3 hp (2200 rpm)

Bucket capacity: 0.2 y³

Digging depth: 10.34ft in

Max Reach: 17.2ft in

Load Height – Std

4WD EXTENDAHOE.

BUCKETS AVAILABLE 12″, 18″, 24″, 30″

New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=Construction&category=Skid+Steer+Loader&make=Caterpillar&model=236&modelid=92211#ixzz47kOMa7Qu

The Cat 259 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

ENGINE MODEL

• CAT C3.3B DIT (TURBO)

NET FLYWHEEL POWER

• 73.2 HP

RATED OPERATING CAPACITY

• 1800.0 LB

With a productive combination of high engine power and best-in-class breakout force while maintaining compact skid steer loader dimensions, the CASE SR175 skid steer will boost your performance and productivity. Built-in serviceability along with easy accessible filters and engine fluids make maintenance on the SR175 model a breeze. The new DOC-Only solution provides a more convenient and higher performance alternative to meet Tier 4 emissions regulations.

The Cat® 226 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

ENGINE MODEL

• CAT C2.2 CRDI

NET FLYWHEEL POWER

• 65.8 HP

RATED OPERATING CAPACITY

• 1550.0 LB

The Cat® 226 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

ENGINE MODEL

• CAT C2.2 CRDI

NET FLYWHEEL POWER

• 65.8 HP

RATED OPERATING CAPACITY

• 1550.0 LB

The Cat 239 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

ENGINE MODEL

• CAT C3.3B DIT (TURBO)

NET FLYWHEEL POWER

• 73.2 HP

RATED OPERATING CAPACITY

• 1800.0 LB

The Cat 236 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

ENGINE MODEL

• CAT C3.3B DIT (TURBO)

NET FLYWHEEL POWER

• 73.2 HP

RATED OPERATING CAPACITY

• 1800.0 LB

The New Holland 110TL Skip Loader is small enough to maneuver yet powerful enough for many jobs.

The New Holland U80 Skip Loader is perfect for all kinds of work the U80 has the brawn to get the job done.

ENGINE

• 4-CYLINDER DIESEL ENGINE (80 HP)

HITCH

• CATEGORY 2 THREE POINT HITCH (PTO RATED 66 HP)

– Easy to use, operator-friendly controls

– Low Maintenance
– Fits through narrow gates and doorways
– Will trench close to walls, fences, etc.
– Heavy gauge steel unibody frame
– Durable powder coated finish
– Choice of carbide tipped Shark Teeth or carbide tipped Bullet Teeth
– Solid roller digging chain for increased life
– Wide pneumatic tires with tubes
– Centrifugal clutch equipped with needle bearings and all metal drum and shoes

The Ditch Witch RT12 walk-behind trencher is powered by an 11.7-hp (8.7-kW) Honda^® engine and offers a choice of high-flotation tires or heavy-duty DuraTrak™ track assembly.

Heavy-duty frames and components to stand up to the toughest jobsite conditions. Chains, teeth and sprockets are specially designed and manufactured to work together to provide exceptional productivity, and last longer than any other digging system. Superior-quality Honda engines run hard all day job after job, year after year.

Every component, every detail of the Ditch Witch RT walk-behind trencher family has been contemplated, evaluated, and executed to create machines that will give you the absolute best bang for your buck—period.

The Barreto 712 Micro Trencher features a unique automatic wheel drive propulsion system. This trencher utilizes a load sensing hydraulic valve to adjust the trenching wheel speed to the load on the digging chain. When the load on the digging chain increases, the sensing valve sends less oil to the wheel drive motor and the wheel speed will automatically slow down. When the load on the digging chain decreases, the sensing valve sends more oil to the wheel drive motor and the wheel drive speed will automatically increase. This keeps a constant load on the engine, regardless of the depth of cut or differing soil conditions. This keeps the trencher running at optimal efficiency, allowing you to get the job done quickly and without delay.

Maximize performance and your return on investment with the Ditch Witch C16X Walk-Behind Trencher. Our exclusive CX Track design delivers better traction and maneuverability in a more compact design for tighter jobsites. Responsive, easy-to-use touch controls provide smoother operation. And superior serviceability—a simple, open design for easy access and no daily grease points to worry about—means less maintenance time to keep your C16X rental-ready. Get proven Ditch Witch reliability in the latest, patented CX track design: only with the C16X.

Every component, every detail of the Ditch Witch RT walk-behind trencher family has been contemplated, evaluated, and executed to create machines that will give you the absolute best bang for your buck—period.

An all hydraulic design makes the use of this trencher easy and efficient! The controls are simple which makes operation easy to learn.

Ground Drive Forward: 148 ft/min

Digging Chain Speed: 200ft/min