Shop
-
337 SERIES STUMP GRINDER 337-13HC
$149.00 – $209.00Our stump cutter is easy to operate, lightweight, and requires trailer to transport.
-
337 SERIES STUMP GRINDER SWIVEL 337S-13HC
$169.00 – $229.00Our stump cutter is easy to operate and requires trailer to transport..
-
68 LB Jack Hammer
$99.00 – $129.00- Powerful 15.0 AMP motor delivers 1,100 BPM to handle the most demanding applications
- Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
- L.E.D. power light indicates switch failure or cord damage
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Automatic brush cut-off protects commutator from damage for longer tool life
- Lowest noise level in its class at only 107dB
- AC/DC switch for use with alternative power source
-
Aerator
$89.00 – $109.00Honda® GX120 Engine
Five tine wheels pull 15 percent more cores per square foot than competitive models for the best quality of core -
Air Brad
$19.00 – $39.00The Porter-Cable BN200C 18-Gauge 2 in. Brad Nailer Kit Drives 18-Gauge nails from 5/8 in. to 2 in. length.
-
Air Compressor CFM 110 Diesel
$149.00 – $179.00Our compressor is dependable and efficient. We have hose attachments that include a 60 and 90lb jack hammer, and a Rhino PD55 pneumatic post pounder.
-
Air Finish
$19.00 – $39.00The Porter Cable 16-Gauge 2-1/2 in. Finish Nailer offers durability and convenience in a compact design.
-
Air Stapler
$19.00 – $39.00The Porter-Cable TS056 is as versatile as it is tough. This tool fires both heavy duties 3/8 in. Crown staples from 1/4 in. to 9/16 in. and 18-Gauge Brad nails from 1/2 in. to 5/8 in.
-
Appliance Dolly
$19.00 – $39.00 -
-
Attachment-Brushhog PTO REAR
$129.0066″ WIDE BRUSHHOG ATTACHMENT USED ON Kubota Skip Loader
Per 24 Hours
-
-
-
Auto Feed Drain Cleaner 1/2
$75.00 – $95.00- Large drum holds up to a 100-Foot by 3/4-Inch cable
- 1/2 HP motor with capacitor start
- Pneumatic foot switch
- Cables: Left-wound Flexicore wire rope center 3/4-Inch diameter for 4-Inch to 10-Inch lines and 3-Inch lines without sharp bends; 5/8-Inch diameter for 3-Inch to 6-Inch lines; 1/2-Inch diameter for 2-Inch to 3-Inch lines
- Cutter Set: 33-Inch Flexible Leader, Spear Head, 2-Inch U-Cutter, 3-Inch Side Cutter Blades, 4-Inch Side Cutter Blades, 3-Inch Heavy Duty Saw Blade, 4-Inch Rotary Saw Blades, and Large Retrieving Tool
-
Auto Feed Drain Cleaner 1/2 50
$59.00 – $79.00Carrys 50 feet of 1/2\” cable in a lightweight and portable package.
1/3 hp motor with reverse switch and pneumatic foot pedal
Drives cable at up to 16ft/min
-
Auto Feed Drain Cleaner 5/8
$109.00 – $129.00Holds 100 feet of 5/8\” cable that will clear obstructions in 3\” to 10\” drain lines.
Foldable handle to allow an easy fit in most SUV\’s
Powered by a 1/3 HP capacitor motor with thermal overload protection
-
Baretto 24′ Trencher
$159.00 – $199.00An all hydraulic design makes the use of this trencher easy and efficient! The controls are simple which makes operation easy to learn.
Ground Drive Forward: 148 ft/min
Digging Chain Speed: 200ft/min
-
Bobcat S70 Skidsteer 3′
$229.00 – $289.00A. LENGTH WITH BUCKET 8.4 ft in 2560 mm B. WIDTH OVER TIRES 3 ft in 900 mm C. HEIGHT TO TOP OF CAB 6 ft in 1814 mm D. WHEELBASE 2.4 ft in 722 mm E. GROUND CLEARANCE 5.5 in 140 mm F. LENGTH W/O BUCKET 6.3 ft in 1918 mm G. CLEARANCE AT MAX LIFT AND DUMP 6.2 ft in 1882 mm H. REACH AT MAX LIFT AND DUMP 18.5 in 469.9 mm Specification
Engine MODEL D1005- E 2B-BC -3 GROSS POWER 22.5 hp 16.8 kw Operational OPERATIONAL WEIGHT 2708 lb 1228.3 kg FUEL CAPACITY 6.5 gal 24.6 L MAX SPEED 6.5 mph 10.5 km/h Loader OPERATING LOAD RATING 700 lb 317.5 kg TIPPING LOAD 1405 lb 637.3 kg Hydraulic PUMP FLOW CAPACITY 10 gal/min 37.9 L/min Dimensions LENGTH WITH BUCKET 8.4 ft in 2560 mm LENGTH W/O BUCKET 6.3 ft in 1918 mm WIDTH OVER TIRES 3 ft in 900 mm HEIGHT TO TOP OF CAB 6 ft in 1814 mm CLEARANCE AT MAX LIFT AND DUMP 6.2 ft in 1882 mm WHEELBASE 2.4 ft in 722 mm GROUND CLEARANCE 5.5 in 140 mm REACH AT MAX LIFT AND DUMP 18.5 in 469.9 mm TURNING RADIUS FROM CENTER – MACHINE REAR 61.3 in 1557mm -
Bosch 35 LB. Jack Hammer
$79.00 – $99.00- 35lb Class Leader
- Impact force of 34 ft.-lbs and powerful 1750 W motor – Highest removal rate in its class – up to 50% faster
- Exclusive Active Vibration Control
- Shock absorbing top handle reduces vibration by up to 40% vs. the competition providing uncompromising user comfort for extended periods of work
- In-Line Design – Ultimate tool balance with multiple grip positions for maximum performance in angled, horizontal, and vertical applications
- Large Main Handle – Increased control and handling
- Well Positioned Lock On Switch – Eliminates unintentional shut off
- 360° Articulating Auxiliary Handle – Provides a wide range of movement along with operator comfort
- Carrying Case with Wheels – Convenient storage and easy transportation
- 2 Way Tool Retainer – Accepts standard 1-1/8″ (28mm) hex, air tool steel with retaining collar or Bosch internal locking combo steel
-
Cat 216 Skidsteer
$239.00 – $299.00With a productive combination of high engine power and best-in-class breakout force while maintaining compact skid steer loader dimensions, the CASE SR175 skid steer will boost your performance and productivity. Built-in serviceability along with easy accessible filters and engine fluids make maintenance on the SR175 model a breeze. The new DOC-Only solution provides a more convenient and higher performance alternative to meet Tier 4 emissions regulations.
-
Cat 226 Skidsteer 5′
$239.00 – $299.00With a productive combination of high engine power and best-in-class breakout force while maintaining compact skid steer loader dimensions, the CASE SR175 skid steer will boost your performance and productivity. Built-in serviceability along with easy accessible filters and engine fluids make maintenance on the SR175 model a breeze. The new DOC-Only solution provides a more convenient and higher performance alternative to meet Tier 4 emissions regulations.
